KUNZ INSTRUMENTS

 

                 Easy to use                          Back →

(1) Cool it on a cold surface together with the wax blocks (2) press gently for 10 seconds to cool the wax block (on microtome)
(1) Cool it on a cold surface together with the wax blocks (2) press gently for 10 seconds to cool the wax block (on microtome)

                                                                                                                                                                                      

Recommended routine:


1  First place some wax blocks and the KUNZ CP-10/CP-11 on a cold plate or ice for at least 10 min.
    Install one block on the microtome and do the trimming


2  Use KUNZ CP-10/CP-11 and cool the block for 10 sec. Return the KUNZ CP-10/CP-11 to the cold plate. (It is ready again          after 1 min.) Do the section cut. For several section layers: repeat steps 1 → 2. 

    Install next block for trimming
                                                                                                                                                                                       Back →